I've been down this road of populating a surface mount board. There is a minimum size for a practical board-stuffing operation, and they are below it. They are using prototype techniques for 100 units or so, not techniques that scale.
Surface mount soldering requires applying hot air in a very controlled way, with the temperature ramping up, holding at the high temp for a few seconds, and then ramping down. On a small scale, you have a programmable oven which tries to do that. Those always have heat distribution problems. For production, you have a tunnel oven, with about six sections at different temperatures and a chain conveyor to take the boards through the tunnel. With the tunnel oven, you let the whole thing warm up and stabilize, and when all zones are at the right temperature, you can repeatably solder boards successfully.
They're using a hobbyist-grade pick and place machine. Slow, but cheap. Plus the software isn't ready for prime time. They looked at a used production machine. Runs Windows XP and wouldn't fit through the door. Rejected that.
They're about EUR 30,000 into this, not counting their own labor. This approach is not going to revive electronics in Europe.
Sharing the documentation is also an act of compassion, and very much in the spirit of FOSS & OSHW.
This talk was hands down my favourite talk (and not even in a subject I am familiar with!). These two guys shared a lot of info in little time, and were very humble. It was also a presentation which contains a political component (Europe's lack of independence, specifically hardware-wise), but it managed to avoid that discussion. Why, because it is assumed the attending public shares the same value. Instead, it maintains focus on the taking action part. I am not sure everyone here shares said value, but I do, and for whatever it is worth: USA is in a similar boat.
This is exactly what we wanted to convey: Let's act, our way isnt the best way, but it is the path we're on, and there is little we can do on our own to get to another path.
We don't want to build the european JLCPCB, we don't even know what our company will be in 20 years if it still exists.
What we want is to give knowledge and see more people get into the business of electronics. We also want to give meaningfull jobs to engineers and factory workers which will eventually join us.
We are not going to change the world, I would settle for selling 1 unit of 1 well made product to 1 customer. I would settle for giving one person a job that they love working with cool guys to make electronics. I would settle for the ability to pay my rent from this, from bringing value in the world.
They even specifically call out why they chose not to use a conveyor based oven in the video.
Basically they believe they can be price reasonable at small scales, small batches. Build process knowledge and expertise over time, and then incrementally scale up after assessing bottlenecks.
I think the route of local sustainable, grow as needed or collaborate to expand capacity is pretty reasonable.
Here's a small US-based PCB board and assembly facility in the US, in Hesperia, California.[1] Looks like it might have 20 to 30 employees from the building picture. This is probably about as small as a viable business of this type gets. It doesn't have to be done in a huge plant like JLCPCB in Shenzhen.
Here's a company in India, Invariance, which makes low-cost semi-automatic machines to do exactly the same operations 39c3 is doing.[2] They have three machines - a solder paste spreader, a pick and place machine, and a mini tunnel reflow oven. They make all three machines. These machines intended for small companies who want to assemble their own boards in house. The solder paste spreader is just automated enough to do a consistent job, with pressure and timing controlled. The pick and place machine uses their own feeder design which runs off strips of component tape. The tunnel oven is small, only about a meter long.
That's close to a viable minimum production solution.
This is a hacker messing around who is presenting to inspire others and get feedback. Many things presented at Xc3 are wildly impractical, potentially illegal, or not even technical at all and more on the side of activism and policy. Most are interesting and fun, which is the main goal.
Being 3x as expensive as China but 0.1x as expensive as current small-scale EU manufacturing can be extremely competitive. Plenty of people looking for <1000 unit runs would be willing to pay extra for a "made in EU" label.
It doesn't need to be cutting edge, if you have a few board assembly shops and some fabs pumping out small chips in 20-30 year old process nodes it helps the resilience of the economy and geopolitical situation a great deal.
Rule #23: Don't compete to be at the bottom, as you just might actually win.
Have a great day =3
Besides other than that what can you really differentiate in this field that isn't cost? Its a service that is standardized regardless of country. Maybe you can provide different "styles" of boards (ie. different specs) or improve the entire submit to production pipeline but thats about it.
>what can you really differentiate in this field that isn't cost?
Don't worry about it... =3
Was it always the case that Western Capitalism was about optimising profits for an over-class, the optimising of resources was always just propaganda, or did it once have ethics?
Adam Smith wrote a whole book about ethics.
I actually think the ethical corruption has been very recent and driven by multiple factors, but the most important is the myth that people are rich because they deserve to be, and if they are poor it is because they are stupid or lazy. The rich therefore tend to feel far less noblesse oblige.
There was little utility in judging if it was ethical, but merely to profit by the shortsighted stewards. =3
The commenter above you phrased it well: "Price-reasonable", to us, it's first about breaking even.
I will look into the companies you linked, looks interesting!
Though to give you food for though, I will tell you about a french drone manufacturing company, they manufacture in house, they turn over probably around 10 million € a year.
I know first hand they stencil print around 10k boards a year using a "machine" that is 2x4's from the hardware store, and a credit card :)
Can you also tell us the name?
Now do "It's World War 3 and making this circuit board in the remains of your dilapidated workshop with no supply chain is the difference between beating back the enemy and being conquered."
While an inexpensive PnP machine will do 50k to 80k components/hour. If you have someone doing _any_ task, than add $3 USD * number of operations per unit.
Tech is a low-margin business with a lot of regulations, and should be contracted to a proper facility if making over a few thousand units a month. Tooling up for a production line is almost always a bad idea, as it usually adds additional barriers to a product launch as people get sidetracked. =3
Second thing is talent. People can’t hardware anymore. I mean putting a 0402 capacitor on the printed circuit board is not hard. But doing that in meaningful way gets hard. As a contractor I designed few boards and optimized for production in China. In my dayjob colleagues are stuck in the last century. No recent knowledge about parts, design rules, testing principles… No willingness to learn and talk to Chinese manufacturers about optimization. Just copy paste bad decisions from old boards to new designs.
Honestly I wouldn’t even try to revive anything in Europe. Chinese electronics factories are way too far in the future. The suppliers for my workplace are all stuck in the past. Even the ones with new equipment struggle to use full potential due to worker’s shortage. Which is probably a problem in whole western world. Who wants to be manufacturing technician when you can be lifestyle influencer!?
As other commenters pointed out, the electronics industry is quite big in Europe, on paper it generates a lot of money and sustains a lot of jobs. The issue is a bit more complex, and you point it out when you say people around you are old and old-fashioned.
Like I said in the talk: We used to laugh at the chinese products for how low quality they were 20 years ago, who's laughing now?
I don't believe europeans are unable to turn around this situation in as many years as a matter of fact, it's my core beliefs: That together with other young motivated people we'll build our own little electronics industry for ourselves, among ourselves and people who believe we can one day have theye crazy future factories in Europe.
Yes it's crazy hard, but like you I believe things will get sufficiently bad that more will see that the effort is worth it.
You should check out the 39c3 talk from Kliment, he understands this issue so well, and I'll paraphrase him here: Electronics is dominated by old dudes, the industry is hostile to newcomers, self-taught people, women, and more. But by making an effort to give people who are starting a good experience, we can turn this around.
Honestly there is no worker shortage, in my immediate contacts, I already know 2 or 3 people who are ready to work my production line: They have the smarts, skills, and time. They are unemployed because no one would respect them, and give them a meaningful mission like we would, and it's quite clear this is quite a widespread feeling among people.
For me first steps would be turning bureaucratic ship around and making regulatory framework simpler and cheaper. With some exceptions for startups/small companies during very first months or years. The industry would be more attractive and with more demand for European electronics manufacturing. With more demand it would slowly start growing domestically. It’s insane that the rules for my 1 person company are the same as for Bosch or Siemens. I can praise good lobbyists work. There are two engineers at my dayjob that are writing mandatory documents about cadmium amount in screws or calculating sustainability parameters…
Of course quasi monopolies of European industry are hoping to lobby these measures to suit them more than small players, but I am hopeful, as we have some very good legislators and politicians who are on our side.
Also Eurostack (of which Eilbek Research is a member) is a lobbyist group pushing for Draghi-adjacent policies, most of all: Relocating the entire cloud stack to Europe. And while for the bigger members of this organization it means having our own Google or Facebook (including their harms), it cannot help but inadvertently push the EU to pass laws that will further the agenda of eroding the USA-Tech monopolies.
Cory Doctorow pushes this narrative (https://pluralistic.net/2025/10/15/freedom-of-movement/) that this can only be a benefit in the medium term.
Things are moving in the right direction, not many are talking about it, but when things hit mainstream news, they're already old by the reality's standard.
Actually, I DO believe we are unable to turn it around. I've done EE work both in Europe and in China for over a span of 10 years, and what sets China apart from Europe that enabled them to overtake us is the mindset, both at government support level AND at individual level.
Chinese operated a lot closer in mentality of the US compared to Europeans, as in very cutthroat move fast and break things, wanting to ship a new product every 6 months(!). This mentality is lacking in Europe who mostly stick to slow paced industries where there's a national security, regulatory or bureaucratic moat like aerospace, defense, telco, industrial automation or automotive, but nothing cutting edge in consumer space that's dominated by China, Korea, Japan and US.
Then there's the massive investments and support from the Chinese state that's missing in European electronics industry. To get an idea compare to the massive sums Europe invests in pharma(or life sciences) versus pitiful investments in electronics for example, and you'll get what I mean.
Until those change, we have no chance, we're just dreaming and huffing copium that somehow things will magically improve out of the blue.
>the industry is hostile to newcomers, self-taught people, women, and more.
Pretty much this, minus the hostility towards women part. I've had few women colleagues everywhere I worked in EE, there's no gender hostility or discrimination, just that young girls looking for a career, aren't really into sitting hunched down over a table and soldering and probing PCB's in a lab somewhere in a techo-park in the outskirts of town as a career, when stuff like HR, marketing, brand design in the city center, is way more hip and appealing to young urbanites. You can't force people to be attracted to a specific industry or line of work. Similarly how there's not much women in construction, welding, oil industry, fire fighters, LEO, etc and it's also not due to hostility, or how there's not too many men in nursing, HR or childcare.
> They are unemployed because no one would respect them, and give them a meaningful mission like we would
I hope you realize, you're not really selling the European electronics industry optimism here with this example of skilled people being passed on for employment.
I disagree. There is a great deal of variation between countries and companies. My daughter is in automotive electronics (in R & D rather than manufacturing) and her employer and country are at the better end of the spectrum, but there are definitely places where it is very difficult for women.
> You can't force people to be attracted to a specific industry or line of work.
That depends on culture and upbringing. If you bring girls up to think that electronics or software or whatever is a male pursuit they will avoid it. A lot of this is set in early childhood and subtly so. Have you seen the difference in the toys little girls and boys get? Or who helps dad (and its almost always dad!) with the DIY or setting up a new gadget or similar tasks? I was my kids primary parent, so they picked up I liked and I just assumed my kids were likely to be interested in things I found interesting.
Completely agree.
Then the Semi industry wonders why they're running out of people
Worker's shortage is a real problem in China as well. Their approach? Automate everything. Focus on manufacturing 1000s of designs using a handful of standard formulas, instead of treating every design as bespoke. There's no reason this couldn't be done in the EU.
It's going to require a serious cultural shift, but given the right incentive I see no reason why it would be impossible.
Not if you're a Chinese OEM: you just mail it in, and thanks to the arcane operation of international postage it's cheaper to post to Germany from China than from Germany. CE is such a European type of regulation, there's almost no enforcement, while at the same time it's so vague that simply working out what directives you might need to comply with is time-consuming.
Mind you as others have pointed out, there is still EU electronics. It's just not massive production runs for consumer electronics, much more of it is for defence, aerospace, and medical. And a bit of automotive, although that is definitely going to fall to Chinese car OEMs.
The whole problem is that the EU electronics industy is laser-focused on those defence and aerospace runs. They expect everything to be bespoke and complicated, so their entire business model is built around it.
But the vast majority of hardware isn't that complicated. I don't want a two-month ordering process with a "call for pricing" and a €1500 "engineering fee" - I want a JLCPCB-like instant quote and click-to-order for my dime-a-dozen 4-layer 10x10cm prototype!
The fact that a handful of industy giant are still doing production in Europe while moving at a glacial pace is not that relevant when China is rapidly out-innovating the West. If it continues like this, they will eventually die too.
CE for simple consumer products is actually not so pricy, and things are moving very quickly there in the right direction. We work with Smander.com for compliance, but there are others who offer it for cheap. The more expensive measurements are EMI, but in Germany universities will let you use their chamber at low cost or even for free if you are a small business or single person.
Honestly the problem with CE is misinformation most of all. It does not need to be complicated: Cheap standards can be bought from evs.ee for 30€, a couple of hours of a CE consultant cost is only a couple hundred, getting close to a university costs only time...
The goals of the EU is also to simplify these regulations, and things are also moving very fast there.
Bosch, Continental, Siemens, Palfinger, FAUN, Webasto, Phoenix Contact, Beckhoff, …
Like Hydac moved some of there assembly from China to Germany.
A company in the district nearby, just moved their whole production from Thailand back to here. Yes, production costs are higher. But there is not transportation costs. They don't have long lead times anymore and can react more better to demand. So the overall costs assessment lead to the decision it is better to have production here locally.
I recommend to go to SPS, Agritechnica, and so and talk to actual people.
BTW: Even as Continental has layoff. There are other companies around that happily absorb those people. Because 2 years back, that had problems employing people.
If possible I would like to know what positions and how much they were offering.
I had offerings for a manager position, 15 people, responsibility for the 15, including in house training of them, and part responsibility in the 5 different projects these people were working on. They wanted somebody with background in HW development, 10 years experience in FPGA, experience of at least 5 years Linux driver development, cryptography, at least 5 years managing people.
Wait for it… they offered 80k/year. I don’t know… seems little bit low somebody with like 20 years experience.
Under pay, no one takes the job, so justify off-shoring.
The truth, having talked to employees at big firms, is that in the past, entire factories were off shored to save 10 cents from one single part in a product.
Today, most jobs are not just under-paid, they are undignified. Because any job can be gratifying in the right circumstances, even a job on a factory line, it just has to:
1. Pay a fair wage 2. Be designed to be gratifying
Companies dont even care about their customers anymore, we all know it's been more than 15 years since they've cared about their employees. That's how entshittification goes.
Who is "that" in this context? Can you be more specific.
>Even as Continental has layoff
Not just Conti, but all major automotive suppliers, semiconductor, embedded companies spread across Europe had mass layoffs.
And not everyone was quickly absorbed. I have EE friends almost a year unemployed after the layoffs. They apply but only get rejections, not sure why. It's a bloodbath right now in industries in high-CoL regions.
I just named a fact. I know people in at least 3 different companies in the list that lost their job last year, and many others which are in the list until 2030. The people that lost their jobs are/were more than 1 year searching. I’m talking with many “actual people” in different industries, and it is not looking very bright…
Most of the open positions is management of projects in other parts of the world. I see almost no development in SW or electronics going on here, much less production.
You can't easily and cheaply get 10, 100, or 1000 units manufactured in the EU the way you can in China. This pretty much kills hardware startups and scaleups wanting to do local manufacturing.
If you're not a multinational or have an essentially-unlimited budget for your small-scale run, you have to outsource it to China.
The other reason is that we do some low complexity boards all specified with chinese parts, JLCPCB for the win, and our contractor agrees with us. They are not interested in those jobs because they can't possibly compete.
However, for our batch size/complexity our local contractor beats the chinese, by a good margin, and they keep growing the business. In Italy. The only problem we have with them is lead time, because there is always some hiccup, some missing part, some email that gets answered a day too late. I've been asking them for years to just provide their catalog with their partnumbers so i can just specify them in the BOM, and we won't waste all that time back and forth, but it's never been a true priority, but they do need to streamline the process. All european manufacturers need to streamline their process.
Another comment here lamented that the issue is that the fabs may try to treat every board as unique, whereas is should be us designers that adapt to them. I agree. That's a general issue in our attitude to designing a product, in many areas.
Manufacturers in china just do it fast, and avoid all the pains, they actually care about customer experience above all, something we have to learn from ourselves obviously!
As I said in another comment, I fully expect things to change for the better: Some manufacturers will go out of business, but yet others will turn around in time.
All these people that were laid off will find jobs again, revitalizing moribund companies. Some will create their own companies, I view myself as part of this group.
I just named some big name brands. I also know mid-size and smaller brands.
Building your business and getting your stuff together is hard for any startup in any business field.
I tried quite hard to find them when I was still in the hardware world, and I never managed to find anything even remotely close to what China offers at less than 10x the price.
I'd love to give it another shot for some hobby projects if the industry has indeed changed in the last few years!
You can't beat JLC because the model from JLC is that they lose money on all order less than 100 boards, so that they win order of 10 to 100k+
If you work in germany in engineering, you know a lot of mittelstand (SMEs) actually have some production machinery, as said, usually they have between 50 and 200 employees, and they manufacture pretty niche products up to 10k units a year or so.
They do not advertise this, as their business model is not manufacturing, it's selling their own products.
I am actually the speaker of the talk, and for us, manufacturing is not a business model either, it's just the capability we want to develop. Our business model would be to sell products. We shared our knowledge and results because we were curious about people's thoughts, and because if we fail and disapear we want this stuff to be online where other can find it.
For those who come after. ;-)
From my knowledge, the last time (2022ish) we talked about that was, that they don't take new customers for now. They are working at capacity.
They don't have a real website advertising their services, but they seem to do well, probably their customers know them. They've run their business continuously for at least those 10 years I've lived at that spot. I could smell the soldering oven running constantly.
Before influencers people wanted to be actors. It predates the time before Electronics was 'lost' in Europe so thats not a convincing argument.
What you are saying really is that the world enjoys what we have on the backs of inadequately paid production engineers in China. As their demographic crisis does not produce a similar sized replacement generation, that benefit will go away as experts retire and no one replaces them. So one way or another wages will go up meaning inflation will go up and some of those 'lifestyle influencers' will now consider the field because it is a viable career path in terms of pay.
I heard Poland is doing amazing right now, but where I live half my friend group including me has been through layoffs in the past 2-3 years and every day when I open the news, large companies in my country are announcing layoffs or hiring freezes, and small to medium sized ones are announcing insolvencies.
https://www.youtube.com/watch?v=CTPb7etzOmA
Designs that contain China parts are often immediately disqualified from most trade exemptions. The landed cost can bump gadget retail prices too high in some countries. YMMV =3
"In Leoben befindet sich das weltweite Headquarter von AT&S. Derzeit gibt es drei Produktionslinien, die eine Reihe von verschiedenen ML/HDI Highend-Leiterplatten, Embedded Lösungen für Power Applikationen vor allem im Server Bereich und Cores für die IC-Substratwerke herstellen. Weiteres werden spezielle Technologien für Aviation & Satellites, Industrie, Automotive und den IC-Markt entwickelt und gefertigt.
Mitarbeiter: 1.759 Eröffnung: 1982 Fokus: Automotive, Aviation, Industrial, Medical, Communication, Consumer, Computer, Semicon Ein neues Werk, das derzeit gebaut wird, wird auch die Produktion von IC-Substraten nach Leoben bringen, einschließlich bedeutsamer Kapazitäten für Forschung und Entwicklung. Mit dem neuen Werk werden rund 700 neue Arbeitsplätze geschaffen, wodurch sich die Zahl der Mitarbeiter:innen nahezu verdoppeln wird.
Fabriksgasse 13, 8700 Leoben, Österreich"
Main issues is solvent recovery: as another commenter pointed out, Galden is very expensive, and it is also extremely greenhouse inducing and we were not confident in our ability to recover it completely, especially at "scale" (100 boards per month or so).
In our case, we picked a hot-air convection oven, which, while not as good as VPS, is still a lot better than IR at not burning components. Our main challenge is always space, so we went for a production batch oven which already has more throughput than we need for us to get to profitability.
The plan is to upgrade to a long and big conveyor oven once we move to a bigger facility, these are quite cheap and they are compatible with a fully automated production line.
You can buy the exact same products if they have enough in stock on either platform so price should be about the same e.g. https://www.crowdsupply.com/mouser-electronics and the opposite https://eu.mouser.com/manufacturer/crowd-supply/
They might have big margins on generic products but nothing obvious to me. FWIW bought uSDR with antennas just last month.
It's not an industry seminar on how to start a board house, it's two guys explaining how they automated the basics of production on a low budget and with space constraints, etc.
OpenPnP is currently more than able to assemble electronics, Opulo and LumenPnP are used by many profitable companies (many I know first hand).
Our opinion (shared in the talk) is that there is a little bit of work to bring it from "able to assemble electronics" to "entreprise-ready" in the sense of adding features like access rights (operators and admins shoudl have different rights) and integration to Inventree, our inventory and parts management software.
Investing in even new production devices is a dead end, and our vision is that owning 100% of the software is owning 100% of the capability. China essentially developed their solutions themselves, and I believe that is the reason why they are so advanced.
Entire business needs are locked behind aging software, licensing hell, an junk fees, both in europe and the US.
But much of the electronics industry in the EU is B2B and centers around producing high-margin products where 10.000 units of a product would be huge.
The company I work for, for example, usually produces a few hundred units of a product before the next revision replaces it. Whether or not the PCB costs 20€ more or not really isn't that important if you only plan to sell 100 devices of it per year for 10k€ each. Aspects like quality and regulatory conformity are way more important here.
The whole "But how can this be scaled and monetized" crowd here also does not seem to understand the point of such projects and Germany's Hacker community. It is about learning and just doing it, much less about building a high–revenue business.
Many people don't have the desire to expand forever. In my case I hope the company grows o 20 or 30 employees, and then I would work stabilizing it so it can last 50+ years. e.g. setting up a trust to oversee the well being of employees, the quality of the products, etc.
This is completely alien to most american founders and businessmen, in the words of Larry Elison: "it's not enough for me to win, it's about everybody else losing"
A discussion that got cut from the talk at the early draft process was defining what "small-series" and "large-series" mean.
To me, at a human scale and without dystopian monopolies, a small series is anything under 1k, a medium series around 50k and a large series 100-500k.
I wanted to define a special class of series, because to an american a small series is probably more like 100k, and a large one 1 million or more, last year something like 230 million iphones were sold globally and that's an absurd number imo.
Because my vision of a healthy electronics industry is 200 companies each selling competing runs of 1 million units, rather than apple selling all 230 million.
In my ideal world then, the only way for apps to be distributed is a marketplace that is regulated and prevents apple from imposing their 30% tax on every dollar spent on the app store.
Heavy focus on low-capex and machines we can easily scale and hack up specifically for high-mix/low-volume work.
Their business model is pooling small orders and sending them to board fabs in europe, mainly germany and some in the east.
For higher-end board that seems likely. For cheap hobby-grade boards just the job fee[1] is more than 10 boards delivered is from JLCPCB.
That said, thanks for reminding me. Will definitely compare next time I need boards.
[1]: https://community.aisler.net/t/our-simple-pricing/102#p-124-...
Express service adds ~20 EUR, roughly the same cost as picking DHL express delivery on JLCPCB.
Just checked myself using a board I already had manufactured, and can confirm it's a lot higher than JLCPCB or PCBWay.
Maybe for rapid prototyping it is okay, but at scale, to make one board is more than the entire selling point of the whole device.
On top of that they also offer 3D printing, CNC machining, sheet metal bending, and even a McMaster-Carr-like parts store. It is literally a one-stop-shop for all your hardware prototype needs.
For a lot of parts the exact details aren't crucial. If I'm using 4k7 0603 I2C pullup resistors I'm more than happy to swap them for 5k6 0402 if they just so happen to have a reel of those lying around and it means not having to wait two days for a restock.
Same with plenty of other parts. Maybe 10% is crucial, the rest can relatively easily be swapped out with whatever happens to be available. Transistor from a different manufacturer, generic level converter with two extra channels, LDO in a different package? If I know what is available, for a proto run I'm more than happy to make a few small changes!