To put into context: this is 3x the ROM/RAM of the ZX81 home computer of the early 1980s. The ARM M0 processor does full 32-bit multiplication in hardware, versus the Z80 that doesn't even offer an 8-bit multiply instruction. If we look at some BASIC code doing soft-float computation, as was most common at the time, the execution speed is about 3 orders of magnitude faster, while the cost of the processor is 2 - 3 orders of magnitudes less. What an amazing time we live in!
Now that it is a pity that when people talk about saving the planet everyone keeps rushing to dispoable electronics, what serves me to go by bycicle to work, be vegetarian, recicle my garbage, if everyone is dumping tablets, phones and magnificient thin laptops into the ground, and vapes of course.
Yet, I still need to wait about 1 second (!) after each key press when buying a parking ticket and the machine wants me to enter my license plate number. The latency is so huge I initially thought the machine was broken. I guess it’s not the chip problem but terrible programming due to developers thinking they don’t need to care about performance because their chip runs in megahertz.
"Key presses are 15x slower than they should be" gets labelled P5 low priority bug report, whereas "New AI integration to predict lot income" is P0 must-fix because on Tuesday a sales guy told a potential customer that it'd be in the next version and apparently the lead looked interested so we're doing it.
Most software sucks, even when people have to chose using it. Everything is buggy and slow, people are just used to software being bad.
When the device is new this is an absurd amount of time to wait. As the device degrades over 10, 20 years, that programming will keep it working the same. Awful the entire time, yes, but the same as the day it was new.
The right person is the other riders on the train - but the hard part is to frame this such that they join you on a march to the the agency that owns that machines to complain. I wish you the best of luck figuring out how to do that (I don't know how to do it - and if I did there are might higher priority things that need to be fixed).
If you keep your finger on the touchscreen for just long enough, it helpfully repeats the keystroke while you're entering a license plate.
Given the inevitable hardware issues, this means that what should be a single tap frequently becomes a burst of identical characters.
The programmers who worked on this probably would've liked to be game developers instead.
We can make crazy latency ourselves just fine, no space transmission necessary
https://skeptics.stackexchange.com/questions/52448/were-face...
Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.), and have someone deploy, install, manage, update, etc. all of that.
You don't need any of that. You need one more box in the electrical closet and one password protected wifi for all the crap in the building (the actual door locks and the like) to connect to.
The doors the system controls don't have any of this. Hell, the whole building doesn't have any of this. And it definitely doesn't have redundant internet connections to the cloud-based control plane.
This is fear-mongering when a passive PC running a container image on boot will suffice plenty. For updates a script that runs on boot and at regular intervals that pulls down the latest image with a 30s timeout if it can't reach the server.
Both an embedded microcontroller and a PC have storage. The reason you can power-cycle a microcontroller at will is because that storage is read-only and only a specific portion dedicated to state is writable (and the device can be reset if that ever gets corrupted).
Use a buildroot/yocto image on the PC with read-only partitions and a separate state partition that the system can rebuild on boot if it gets corrupted and you'll have something that can be power-cycled with no issues. Network hardware is internally often Linux-based and manages to do fine for exactly this reason.
Assuming the internet connection and AWS work of course. Which they won’t always, then oops.
A card access system requires zero cooling, it’s a DC power supply or AC transformer and a microcontroller that fits in a small unvented metal enclosure. It requires no management other than activating and deactivating badges.
There is no reason to have any of the lock and unlock functionality tied to the cloud, it’s just shitty engineering by a company who wants to extract rent from their customers.
It started crashing during backups.
The solution was to stick a fan on it. :( This is literally a box _designed to not need a fan_. And yet. It now has a fan and has been stable for months. And it's not even in a closet - it's wall-mounted with lots of available air around it.
Any access control system that fails in the event that it loses internet connectivity is poorly designed.
> Yes, but still probably a million times easier for both the building management and the software vendor to have a SaaS for that, than having to buy hardware to put somewhere in the building (with redundant power, cooling, etc.)
A isolated building somewhere in the middle of the jungle dependent for its operation on some American data-center hundreds of miles away is simply negligence. I am usually against regulations but clearly for certain things we can trust that all humans will be reasonable.
Besides the fact that scanning a barcode seems beyond much of the general population, they do it so sloooow.
What's slow is that after each scan it needs to check the weight which means it lets the scales settle for one second before accepting another scan.
I scan as fast as a manned checkout (I did my time in retail). And I can scan my groceries at the speed whilst the people next to me spend most of their time rotating an item to find the barcode.
Maybe that ticket machine was coded in MicroPython. /s
Forth is usually interpreted and pretty fast. And, of course, we have very fast Javascript engines these days. Python speed is being worked on, but it's pretty slow, true.
* https://www.forth.org/fd/FD-V06N5.pdf
Basically it is because Forth programs are fairly flat and don't go deep into subfunctions. So the interpreter overhead is not that great and the processor spends most of the time running the machine code that underlays the primitives that live at the bottom of the program.
It's a list of jumps to functions.
- Visual Basic. Yes, it was interpreter, and you used to like it. GUI ran fast, good for small games and management software. The rest... oh, they tried to create a C64 emulator under VB, it ran many times slower than one created in C. Nowadays, with a P4 with SSE2 and up you could emulate it at decent speeds with TCL/Tk 8.6 since they got some optimized interpreter. IDK about VB6, probably the same case. But at least we know TCL/Tk got improved on multiprocessing and the like. VB6 was stuck in time.
- TCL can call C code with ease, since the early 90's. Not the case with Electron. And JS really sucks with no standard library. With Electron, the UI can be very taxing, even if they bundle FFMPEG and the like. Tk UI can run on a toaster.
- Yeah, there is C#... but it isn't as snappy and portable TCL/Tk with IronTCL, where it even targets Windows XP. You have JimTCL where it can run on scraps. No Tk, but the language it's close in syntax to TCL, it has networking and TLS support and OFC has damn easy C interops. And if you are a competent programmer, you can see it has some alpha SDL2 bindings. Extend those and you can write a dumb UI with Nuklear or similar in days. Speed? It won't win against other languages on number crunching, but for sure it could be put to drive some machines.
The founders went on creating OutSystems, with the same concepts but built on top of .NET, they are one of the most successful Portuguese companies to this day, and one of the few VB like development environments for the Web.
So you end up with something that could probably be coaxed into running DOOM at playable FPS (if it had enough RAM and a display) relegated to running a humble - and frankly objectionably wasteful (coupled with questionable health outcomes with long term use) - disposable vape.
Vapes are probably made in enough quantity to warrant custom silicon. Then the mosfets and charge circuit could be on the same die. It could be mounted COB (black blob).
They could probably use a single 'microphone' (pressure sensor) and determine which setting based on a photodiode.
The PCB's could be replaced with a flex PCB which integrates the heating elements (Vegetable Glycerine boils at 290C, whereas Polyimide can do 400C for a short while). Construction of the whole device can then involve putting the PCB inside the injection moulding machine for the cavities, eliminating all assembly steps, joints and potential leaks, and reducing part count
So, probably enough to land on the moon. And cheap enough to justify a dozen backups.
There's two limiting factors for 'smart dust': power (batteries are the majority weight and volume of this vape), and antennae (minimum size determined by wavelength of carrier wave).
I believe you can fit an NFC module in a 5x5mm package, but that does externalize the power supply.
LCSC says between 6 and 8 cents in volume:
https://www.lcsc.com/product-detail/C5292058.html
500+ $ 0.0802 2,500+ $ 0.0727 5,000+ $ 0.0682"
I am now wondering if it's possible to put a ZX81 emulator on one of these microcontrollers. It would need to emulate the Z80 but you've got plenty of spare cycles, and 3x the ROM and RAM of the original, so enough space for a small emulator!
Is that inflation adjusted? If not, the real cost difference is even starker.
It’s beautiful, I love it.
I won't speculate about whether the plastic on the board is recyclable, or ecological to recycle. I don't know. This is what I'm asking.
Metals, especially aluminum, get widely recycled because it actually makes financial sense.
Plastics, well, you are probably better off burning them for electricity.
I wouldn’t really call that recycling.
But yes, not proper recycling.
Edit: I'm actually curious l, i don't know how recycling supposed to work for electronics and how it can be a scam.
(The above is not so much about processors, but about plastics. As long as we are still burning any fossil fuels at all, we are probably better off holding off on recycling and instead burning the plastic for electricity to use ever so slightly less new fossil fuels for power, and instead use the virgin fossil fuels to make new plastics.
Especially considering the extra logistics and quality degradation that recycling entails.
Directly re-using plastic bottles a few times might still be worth it, though.)
The World has limited resources, we don't have a spare.
Do you need it spelling out more clearly?
The world has effectively infinite resources, getting more is usually just a matter of figuring out better extraction techniques or using better energy.
Also, if you go for measures like mass processed, the weight of microchips, pcbs, parts is only a tiny fraction of what has to be processed and build in the supply chain.
Agreed that it is smarter to use oil for plastics then to burn it directly.
My argument is that as long as we are still burning oil and gas, we might as well burn old plastic instead of new oil and gas.
If/when we stop burning oil and gas, then we can think more seriously about recycling plastic.
1) Plastic is not liquid, so you can't pipe it to a gas or oil power plant. You may argue that coal isn't liquid either, but continue reading...
2) Burning plastic generates toxic fumes.
3) Plastic ash is sticky and very difficult to clean.
Directly reusing plastic bottles that were not meant to be is bad for your health though, isn't it?
You need to offer an incentive (ie: discount on new vape if you recycle) and then, from my experience, most people will recycle.
Here in NY as a cannabis user, one of the brands available that offers vapes (Fernway) offers a recycling program at dispensaries. I get 10% back off my next vape/cart if I return the old one to the recycling dropbox. My dispensary also keeps how many I've returned on file if I return extras, so I keep a 'balance' of disposables returned for the discounts.
When computers become disposable, their programmers soon become disposable as well. Maybe, you shouldn't love it.
I feel like, pioneers of the past would be rather disappointed with us.
I mean, primarily we're not using this ridiculous power to solve actual problems, but to enslave one another in addiction, mindless consumption and manufactured consent to a lesser life.
Almost 100 years later, now with computer enabled misinformation and agitation campaigns by tech oligarchs, a new fascism is on the rise and Alan Turing would be called an abomination, again.
These things should have 100 times the deposit amount of a can of soda with mandatory requirements for retailers to take the 'empties' back.
Everybody makes fun of paper straws. Or they made fun of wind power when it was barely 0.1% of energy production. Why not immediately demand 20 years ago that all single use plastic is banned? Or that only wind and solar are allowed? Because the step is too big, it would not be accepted. You need to take one step at a time.
That's even a viable strategy against procrastination. There is this big daunting task. So much to do! Oh my, better scroll a little tiktok first. No, just take a small first step of the task. Very small, no big commitment. Then maybe do some tiktok, but the little first step won't be too much. Result is, you have an immediate sense of accomplishment and actually made progress, maybe even stay hooked with more steps of the ultimately big task.
Yeah, because they suck. Uh, pun not intended. Paper straws get somewhat soggy and feel bad in your mouth. They are inferior to the plastic straws they purport to replace, so people resist them as much as they can.
If you want to actually make a difference with an environmental effort, you need to make something superior. Nobody makes fun of LED light bulbs because (up front cost aside) they are wildly superior to incandescent. People actually like having LED bulbs and seek them out. The same cannot be said, and likely never will be said, of paper straws.
https://fortune.com/well/2023/08/24/paper-straws-harmful-for...
What a stupid joke.
There's burgeoning movement called "PWM sensitive"[1] that's opposed to (cheap) LED lights.
Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
Nope, that's a myth. Plastic is essentially unrecyclable. Some types of plastic can be made into "lower" quality types with lots of effort, but there is no circular reuse. The oil and plastic industries want to make you believe that this is all a solved problem, but it very much is not.
In contrast, paper and wood products just rot away at the end of their life, and a new tree grows in their place.
It's the same for paper and cardboard, and it's much better to reuse it as much as possible to avoid cutting a tree. Letting it rot releases the same amount of CO2 than burning it, by the way.
https://plasticsrecycling.org/how-recycling-works/the-plasti...
It’s more okay to make things out of paper than plastic, yes. Plastic waste and microplastics are a huge problem. Trees are a renewable resource.
> Moreover, paper straws are not even recyclable due to water content which makes them soggy. Plastic ones are almost 100% recyclable
Plastic straws are almost never (literally never?) recycled. Paper straws are supposed to be fully biodegradable.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
But yes, this and the usability issue make the other points moot (n.b. leaching harmful chemicals is a concern that also applies to plastic straws and paper cups). The vast majority of existing straws should be replaced with no straw, and most beyond that with reusable straws.
I swear every other one leaks right away, and those that don't can only be refilled once or twice before they do. So you end up going through like 10 of those a day. I also don't know how "eco-friendly" they actually are, since there's a picture of a dead turtle on them under a text to the effect of "don't throw out in nature".
I guess on the plus-side, our company at least provides ceramic cups to their internal employees. But since it's the employees' responsibility to clean them, not everybody is off the disposable cup train.
Paper cups are still provided, but it is intended visitors not people who work in the building.
Yeah, if you're using that many, the solution is, and always has been, to get a proper reusable cup (ceramic, glass, whatever).
Especially in situations where people don't even have an assigned spot in the office anymore, it's not exactly shocking that many will choose the easier route.
Uhh.. yes? Trees can be grown, just like any agriculture product.
> Plastic ones are almost 100% recyclable
In theory. However that rarely works out in practice, due to the complications of mixing various types of plastic in a single stream of garbage.
> Most importantly, unlike plastic straws, they are laced with glue and other chemicals which gets ingested.
The glue for paper straws will be a biodegradable water-based adhesive. It may be finished with natural wax. And that's it. I think you are intentionally spreading FUD saying glue and chemicals.
That being said, I hate paper straws. I like bamboo straws though.
It is when you're trying to suck a thick milkshake through one, though...
There was huge resistance to wiping out the inefficient bulbs in the UK. Many many people stockpiled them.
Classic replacement of something good with something terrible so customers opt out
You're missing the fact that this sort of infrastructure requires a robust business case. That's why scale is critical.
Recycling bottles and cans has a solid business case. Glass and aluminium are straight forward to recycle at an industrial scale, but would be pointless if they were kept at an artisanal scale.
Any moralistic argument is pointless if you can't put together a coherent business plan. The people you need to work and the energy you need to spend to gather and process whatever you want to process needs to come from somewhere. How many vape pens do you need to recycle per month to support employing a single person? Guilt trips from random people online don't pay that person's rent, do they?
> Everybody makes fun of paper straws.
This is specious reasoning. The core issue are tradeoffs, and what you have to tolerate or abdicate. Paper straws are a red herring because the main criticism was that, at the start, they failed to work as straws. So you were left with an industrial demand to produce a product that failed to work and was still disposable.
If you look at food packaging and containers, you are faced with more thought-provoking tradeoffs. Paper containers don't help preserve food as well as plastic ones. Packaging deteriorates if exposed to any form of moisture, and contaminates food so quickly tk the point you can taste cardboard if you leave them overnight. This leads to shorter shelf life and more food waste. Is food waste not an ecological problem? How do you manage those tradeoffs?
Yeah, we had that. Glass milk bottles and coke bottles and bulk goods sold out of barrels by the lb rather than in plastic bags.
But then plastic took off and soon after Big Sugar paid a PR/lobbying firm to run a campaign with a fake Indian crying a single tear and calling every Tom Dick and Harry a “litterbug” and now the pile of garbage is our fault, not the manufacturers.
In Germany, it is such a big issue with people not having other source of income, that there is a culture where and how to leave the bottles around so that they are easier to collect.
I don’t have an issue with it, if they want to do what I am too lazy to do, more power to them.
Maybe the process could be emulated.
The collection mandatorily happens in the shops that sell electronic devices, you don't have to return them to the exact store where it was purchased, as long as they sell similar devices they cannot refuse to take it back (without paying anything more). It works pretty well, even if shop owners/workers aren't always pleasant when you return something.
[1] https://www.erecycling.ch/en/privatpersonen/blog/vRB-Vorgezo...
I call bullshit on these initiatives. It is a tax, period. The government collects money and it does... stuff. It is not a deposit, so it doesn't incentivize people to return the thing, and it is too general to de-incentivize particularly bad products like disposable vapes.
The tax can be used on recycling efforts, and it probably is, however you don't need a specific tax for that. These investments can come from other sources of government income: VAT, income tax, tariffs, etc... I don't think people are paying a "presidential private jet tax" and yet, the president has his jet, and hopefully, all government effort for the environment is not just financed by a small, specific tax. Saying a tax is for this or that is little more than a PR move, they could do the same by increasing VAT, and I believe it would work better, but that's unpopular.
> The collection mandatorily happens in the shops that sell electronic devices
That is more concrete.
https://cdtfa.ca.gov/taxes-and-fees/covered-electronic-waste...
Any items found by garbage program will be collected and returned to manufacturer at cost.
All items sold in country must be identifiable for this purpose. Importers are considered the manufacturers and must retrofit products.
Then we would be getting closer to capturing the total burden to society.
Well that Charmin bear will certainly have his work cut out for him
Do you want to live in a world where only the rich can afford washing machines?
Incidentally, I don't know what you do, but once in a while I throw (carefully, li-ion batteries) my broken electronics in the trunk and bring them to the local collection center.
https://www.amazon.co.uk/gp/help/customer/display.html?nodeI...
Not all stores do that though, if I buy from one that doesn't I can call my local recycling center and they'll eventually get around to picking up the old appliance from your home.
However, this is not done by the manufacturer or importer, as the OP suggested. There are separate organizations and it's paid for via a tax on new device purchases.
Which means a new washing machine manufacturer doesn't need to worry about having their own recycling infrastructure. And I move that the recycling tax I pay for national level recycling adds less to the price than $NEW_COMPANY building their own, just for their models.
The properties of your running water and the presence of very much moving parts in the former?
But if you think it through, it's intractable. You need to 2x+ the transportation cost of all products (it will cost more to get them back for multiple reasons, including products not being as neatly packaged and often going from many-to-one transportation to many-to-many). Companies also need to double their specializations and adopt recycling processes that will largely be redundant with other companies; you basically make it impossible for small companies to make complicated products. And are we including food products, the majority of trash? It makes a lot more sense to centralize waste repurposing and benefit from economies of scale.
Waste management is already a very profitable industry. Of course, it's wasteful, just burying stuff, and environmentally harmful. But I'm of the opinion that it will soon be economically viable to start mining landfills for different types of enriched materials, and government subsidies could bridge the gap for things that are of greater public interest to recycle.
I've been working on the software side of the technology needed to do this in my spare time for a couple years, waiting for some hardware advancements.
As with all economics, it's not a one-way street. A change in conditions causes a change in behavior. Increased costs will cause a change in how products are designed, manufactured, used. If one-time use cost goes through the roof, suddenly all vapes will be multi-use. Plastic bottles will disappear in favor of dispensers and multi-use bottles. Not all of them, but most of.
It's about incentives in a dynamic system, not spot bans in an otherwise static world.
I think 3rd parties would spring up to deal with that stuff
The world was full of new computers popping up and every middle class or above person buying new ones like they do with iphones now. Companies started recycling programs, and many immediately went the route of corruption. They would pack up shipping containers full of ewaste, with 40-50% reusable items, and the rest junk, allowing them to skirt the rules. These containers would end up in 3rd world countries, with people standing over a burning pile of ewaste, filtering out reusable metals. There was, at one point, even images of children doing this work. The usable items were sold dirt cheap, with no data erasing, leading to large amounts of data theft, and being able to buy pages of active credit card numbers for a dollar.
We are talking about less critical things now, like vape pens, but its not a far throw for it to instantly become an actually bad idea to let other companies do the recycling. Make the manufacturer deal with it, or even the city/state, via public intake locations (like was mentioned of switzerland in another part of this thread)
People don't buy this because it's crap. They buy it because it's cheap.
A lot of people wouldn’t want this because it’s asking for stuff to become more expensive for them.
That said, I got quite into this stuff a few years back, and determining "true" cost can be harder than it sounds. Externalities, positive or negative, have to be measured against a baseline, and deciding on where that sits is subject to opinion and bias.
Every bit of plastic humans have made still exits, bar a small amount we have burnt.
That’s concerning.
Now, that plastic is too tough and durable for any modern microbes to decompose it, and it's starting to build up too. It stands to reason that microbes will eventually evolve the means to digest it and make use of this abundant, under-used energy source. In fact, some already have [1], but it's still early days.
I'm not pro-pollution, but this is far from the first ecological disaster that the global ecosystem can probably adapt to.
[1]: https://en.wikipedia.org/wiki/Plastic_degradation_by_marine_...
* https://energyeducation.ca/encyclopedia/Oil_formation
* https://en.wikipedia.org/wiki/Petroleum
these other sources all assert that
The origin of fossil fuels is the anaerobic decomposition of buried dead organisms, particularly planktons and algae.That’s a hell of a way to kick the can down the road.
I don’t have sea views, but if I wait, sea views are coming.
I'm not kidding :)
Yes, but making them deal with it would create a massive incentive to either reduce the amount of rubbish they make, or to make it recyclable/processable.
The great garbage patch in the Pacific is growing fast. The plastic is ending up in everything. We need to do better.
Make less waste. Use less plastic.
And it just doesn't matter. It's a tiny amount of mass / volume.
> The great garbage patch in the Pacific is growing fast.
Ocean plastics are almost entirely a consequence of (particularly Indonesian) fishing net waste, not Western consumer products disposed of in managed landfills. The "great garbage patch" is also very much overstating the scale of the problem; it's a slightly higher plastic density region of ocean.
Are you sure? It’s getting into food. We are eating it and drinking it, and it’s getting more prevalent.
Because 7Bn people multiplied by a few kg/year doesn't seem trivial to me, but sounds like you can prove it.
Geological strata vs shallow landfill sitting above aquifers and subject to near-term erosion.
Disposing of this stuff in deep mines seems like it'd be fine, unfortunately we haven't yet, at a society/economy level, found the discipline to do so. Presumably after a few mya of heat and pressure it'll be indistinguishable from other petrochemicals (which aren't particularly nice to begin with).
All the plastic ever produced could be stuffed back into one medium size coal mine. There are thousands of such mines and they are already ecologically disruptive.
It's a large amount when you think about the logistics to move it around the world, but a small amount compared to the total amount of stuff we take out of the earth.
https://ourworldindata.org/grapher/global-plastics-productio...
Also many countries collect disposable plastic.
This guy[1] explains the problem quite well.
Taxing waste is one part of the story but it's actually a really good thing that vaping is cheaper than smoking so this can only go so far before it's counterproductive.
I think the answers lie in stuff like banning sale of pre-filled ones. If you make people buy a separate bottle of nicotine liquid (and you enforce that this is quite a large minimum size, like we already do with tobacco) and fill the device up before they use it, I think they are much more likely to refill it when it's empty and recharge it when it's dead.
Maybe another thing could be restricting points of sale. I bet a lot of the waste comes from drunk people buying them at 10pm in the corner shop near the pub. If you make people plan ahead that might also help.
Well that is fixable, it's even one of the solutions posited here. Just make them artificially expensive by adding a deposit, which you'll get back when you return it to the shop (instead of throwing it away).
I think a better thing to do may be to try to embed disposal costs into the price of the original product. That changes prices to hopefully incentivise reuse.
I'm in favour of a full ban but it's complex
For example Germany, while the country is famous for the whole splitting the garbage, I am still waiting after 20 years to see the kitchen oil recycling recipients as we have in Portugal.
As for electronics, I would say no one has anything in place, and human nature is as such that hardly anyone will drive to the next recycling center to deliver a single device that broke down, or call the city hall to collect it.
We should go back to the old days, when electronics were repairable, which naturally companies will lobby against, as that will break down the capitalistic curve of exponential growth in sales.
I Portugal there is Rede Electrão. You can deposit those devices in a lot of supermarkets, stores and fire stations.
In Dutch Mediamarkt, the same company as Saturn in Germany I believe, they have bins for electric devices.
However that doesn't change the disposable garbage thing, I bet most of them land in some African landfill instead of being properly recycled.
Because German environmental policy is about virtue signalling to keep the plebs busy, not solving environmental problems. Nuclear power plants replaced by coal and natural gas, obsession with recycling but nothing done about disposable packaging, car regulations and city design dictated for decades by the car manufacturing lobby, combustion engine limits/bans only when said manufacturers thought they could get on the Tesla gravy train and subsequently rolled back when reality became apparent, it just goes on.
https://www.prio.pt/pt/prio-ecowaste
This is only one of the places, there are others where used oil can be brought in.
It's not profitable to recycle small electronic devices otherwise you'd see heaps of shops doing it. It's toxic, hazardous and labour intensive.
100 times the deposit amount would be like $5-10 USD per-device which is insane. I do agree that any retailers should be required to take back empties and dispose of them responsibly.
Sounds like they should be banning their sale and/or production then, just like many jurisdictions have been with plastics and other non-recyclable items. These devices are not an essential-to-life item where the waste produced is justifiable, especially when you consider the LiPo batteries, which are a borderline-environmental disaster from the moment the lithium is mined to the day that battery finds its way to a landfill. Why single-use disposable vaping devices exist in the first place is somewhat perplexing given permanent/re-fillable ones are also available, often right beside the disposable ones, and generally offer a significantly lower cost of ownership.
I suspect you could make the same argument for manufactured cigarettes vs pipe tobacco. It seems people will pay for convenience.
https://www.bbc.com/news/articles/c62vk0p5dn5o
Trash compactors break the batteries in these things. A deposit could help to ensure that the vapes are disposed responsibly.
Other option: Add an "electronics" bin everywhere. Though that would be more expensive and less clear how effective it would be.
This is done for components like starter motors, alternators, power steering pumps, batteries, and a variety of other components. The complex components are re-manufactured to like-new specifications and the less complex components are recycled to recover materials. The battery is a probably the only component where the potential ecological impact drives the cost of the deposit.
If there were a deposit scheme of say five bucks a piece, I'd wager you'd see >80% return rates with every purchase.
Addictions exists. To stop smoking is HARD. Nicotine addition us on par with benzos, prescription opiates or amphetamines.
Looking at this device it feels like it shouldn't be hard to have a reusable base with battery and electronics, and a disposable capsule that attaches on top but is replaceable.
Someone imported it, someone's selling it in the stores.
If the price of the "disposable" is, say, £5, make the deposit £50. Suddenly all the vapes will end up back at the retailer.
And make sure retailer has the financial incentive to return the used disposables and that's it.
I'm confident the lawmakers have been bribed to refuse to tackle the problem, otherwise how you can explain minimum price on plastic bags but tolerating toxic landfill fires and staggering waste of lithium (recycling will inevitably br fixed soon).
you can choose to either vape a flavour version only, or one containing a certain amount of nicotine
Here's a slightly old investigation finding 40% of ewaste being shipped off to china: https://www.ban.org/news-new/2016/9/15/secret-tracking-proje...
Yeah, the deposits for cans are a bit stupid: people already widely recycle aluminum (and scrap metals in general) purely for commercial reasons. No need for extra regulation there like mandatory deposits.
I've lived in places with no deposits and there is much much much more littering compared to places having deposits on every types of metal/plastic beverage containers
Many daily life, single use objects have a lot of thoughts put into them: https://www.youtube.com/watch?v=pj0ze8GnBKA
Is this person really brave, or just unaware of the risks?
https://www.lumafield.com/article/finding-hidden-risks-in-th...
Most likely a promotional from the looks of it. I myself stumbled over it a about a year ago, when someone posted it on an IRC channel.
Later at 6:45 they show more people testing them
That said, it wouldn’t surprise me if he does it all day long, 6 days per week.
It seems almost absurd to what length humanity has gone just to satisfy it's primitive needs.
And this is before we get into dealing with the battery -- which has its own set of risks.
(One of the early sources of funding for MyNewt development was a company that made vapes. Though not disposable ones if I remember correctly).
Also, the MCUs they use are very cheap. They are cheaper than having lots of specialized discrete electronics.
I talked to someone who worked on developing vapes and they spent much, if not most, of their engineering on safety-related issues. They may be an outlier. The reason I remember is because I was surprised how dangerous these devices really are if you get things wrong.
As a software engineer with some hardware experience, I would never use a vape. It strikes me as way too risky. Much for the reason you point out: the companies probably don't care more than they are forced to by regulations.
https://www.ft.com/content/f72f17e4-a83d-4494-b1e7-a349cc7ae...
Many places apparently don't even sell the refills so it's practically the same.
It's one of those UK laws of "we are doing something!" but not actually do anything. These companies either pay backhand or know how to skirt around the rule. Who's enforcing it?
Kids don't have to hide proof of their consumption in their bedroom (well at least until they are hooked enough they can't spend a night without vaping). They buy, consume and throw away before reaching home.
But reuseable vape has more stuff to manage and hide, and they are more expensive in short run.
Same thing with batteries. Ridiculous volume -> low prices. (Laptops and cell phones is why we have usable electric cars. If the EV industry had to drive up the volume all on its own it would have taken much longer to develop that industry)
Wait, what? Where's the sense in that?
Also, when you do get juice online or from other states, it doesn't hit as hard / the same as whatever they put in the disposables. Someone told me it's because the disposables have vitamin E acetate in them that makes the nicotine get absorbed into your blood quicker.
I think the disposables go around more regulations, which mean the chinese manufacturers can put more addictive stuff in the pods / disposables.
The FDA just hates flavored nicotine products because they're appealing (to both adults and children), and the FDA doesn't want nicotine products to be appealing (because nicotine is perceived to be a public health problem on the scale of tobacco).
You want to buy a disposable? Ok, here, $20 and you're done.
But if you want to make the oil at home? Ok, $2000 for lights, timers, nutrients, seeds, and a grow tent. Plus another ~$10,000 for a basic short path distillation setup. And honestly to make anything close to what you get in the disposables, you'll need to hire an expert with experience. And you need a lot of space for your new secret lab. For 99.999% of people, it's super not worth it to make at home.
I hate anything added to the air. Even perfumes irritate and make me sneeze in high quantity.
Nicotine policy and policing has been a clusterf - not only are there wasteful disposable vapes everywhere, but a thriving black market that has lead to firebombings and murders.
In fact, nicotine habits can be harder to kick than heroin. I know plenty of people who have tried to kick nicotine many times and cannot stay off of it.
Anyway, it's moot, because outright banning tobacco is insane.
Kind of odd because the withdrawal is, physically, less taxing than caffeine (never mind opiates...), and yet the brain rewiring to chase the hit is somehow far more pernicious.
You can't "just ban" it or "ban it properly". You would get a very nasty black market and things with such ban.
The current government has started rolling back decades of progress, and SURPRISE, they have close ties to the tobacco industry including MPs who worked for tobacco companies.
As mentioned upthread, Australia has been running a similar strategy of trying to tax smoking out of existence and all that's happened is they've rediscovered the Laffer curve as well as pushing otherwise law-abiding citizens towards illegal tobacco.
There's a limit to how much sin tax people are prepared to put up with. Either its legal to consume or it's not, and vapes are far less objectionable to be near by than traditional cigarettes. It bemuses me that Aus, NZ, Singapore etc have gone down the path of trying to ban vape usage when the alternative is far worse.
"The more you tighten your grip .. " etc.
Having just spent a bit of time travelling, I think vapes are worse to be near than cigarettes or cigars.
Walking down busy street in the UK is just so gross. The sickly sweet strawberry, cinnamon etc. I’d prefer tobacco smoke.
And at least there was some etiquette around tobacco smoking. You don’t often encounter it inside, in planes, trains, theatres, malls etc. all those were going on this month.
https://www.rnz.co.nz/news/political/573271/casey-costello-b...
https://www.rnz.co.nz/news/national/579431/absolutely-ludicr...
Doesn't seem to have stopped kids getting their vapes yet I need to import my cannabis vape via the black market.
Eventually it'll prove very impactful with the youth, it'll reduce the number of users and make it more cost prohibitive to be so prolific as it is right now.
I don't think the post you're responding to is saying that vapes should be banned. Just disposable ones.
I too am agnostic but do not understand this reasoning. BTW let me get severely downvoted by saying that if alcohol prohibition came up for a vote I'd vote yes in a heartbeat.
It reduced the amount of people who drank and it increased health. It increased safety for women and children and reduced violent crime on the streets and in the home. It reduced alcohol related diseases and death. People missed less work. Like with passive smoking, a ban on alcohol positively affects non-drinkers too.
It was the organised crime side effects and societal unpopularity which lead to it's "failure". Alcohol prohibition continues to work in some countries today but I wouldn't want to live there.
Ultimately it's a bio-ethics and freedom issue, issues that continue to raise their head from time to time here and there, e.g. coronavirus responses.
Control of vaping could also be classed in this category.
It doesn't stop addicts from craving and it doesn't curb the appeal of the product. People who think tobacco/nicotine bans would work are people who think they don't have any positive effect associated with them.
People don't smoke because the evil cigarette companies tricked them and now they are addicted. It's a drug, it feels good to do it.
A tobacco/nicotine ban will end up exactly like aby other recreational drug prohibition.
Isn't this exactly what happens, and why cigarette advertising is banned in many countries, and why marketing child-friendly tobacco products is commonly restricted, and why there are even regulations/guidelines around portrayal of smoking on TV in some regions?
I think not banning the cigarette and non reusable vape is the wrong solution but banning smoking in lots of public spaces has improved the situation, maybe not to curb consumption but at least non smokers can breath a little. I wish it would also applies to outdoors cafe/restaurant terraces too as smokers effectively ban to non smokers by spreading their poison around them. They could walk away for a couple of minutes to get their hit but they don't on purpose. There should be a radius around an outdoor terrace where smoking is effectively prohibited.
If you really don't like it, you could just not visit these establishments. To these businesses, the benefit of allowing smoking doesn't outweigh the negatives (some people not liking it). Obviously you don't not like it enough to just not go there. Not a smoker, but i've never understood this puritanical attitude towards smoking and only smoking. Yeah, it's not great to breathe in an enclosed space, but in an outdoor space, I don't see how much worse it is than car exhaust, air quality, etc.
Well I go inside, because there are no establishment in my area that ban smoking in their terrace.
> it's not great to breathe in an enclosed space, but in an outdoor space,
It is exactly the same unless there is significant wind is in a direction that push the fumes away. Obviously it depends on how tightly the tables are put as well but it is just super annoying. I have a friend whose eyes turn red immediately when exposed to tobacco product fumes and he suffers way more than I do.
Also it ruins the taste of food and drinks.
> I don't see how much worse it is than car exhaust, air quality
Usually those that are close to traffic and car exhaust are less popular than those that are less directly Unless you live in a complete smog, cigarettes/vapes fumes that goes directly to your face are always more annoying.
You would have compared to sweaty and smelly bodies in a dance club you would have got a point.
I have a huge old microwave on the blocks next. After that a series of small odd ball electronic toys and a few early LED bulbs. If I ever come across a vape, I'm sure it'll make its way on to the shelf.
With regards to vapes, just look on the ground near a sidewalk. I find like 3 or 4 big depleted vapes a day in a US urban area. Closer to 15 or 20 in greater London in the UK.
There are a lot of fun parts inside microwaves (a personal favorite is the high-torque-low-speed-line-voltage motor, which I use to make creepy Halloween decorations) but the caps, transformer, and magnetron are all useful for somewhat... more dangerous... pursuits.
As far as I can tell, this is an urban legend. No consumer microwave oven has ever used beryllium in its magnetron insulators. Military radar ones, yes (and likely where the legend started.) Some specialist test equipment and RF transmitters too, and they all contain prominent warnings of it. Besides its toxicity, it's far more expensive than regular alumina.
Weren't disposable vapes banned in UK in May 2025? Is the problem still that big?
My home country (India), and others (Singapore, others?) have outright banned all electronic cigarettes which is a regulation I hate. I acknowledge that vapes reduce barriers to entry to kids. This is partly solvable in countries with strong governance.
But disposables? Ban that shit
The issue is that to the end user this is still tangibly the same product - and mostly gets treated in much the same way as the original "disposable" vapes.
https://www.unodc.org/LSS/Announcement/Details/8afbc6e8-9439...
The truth is you can mix your own vape juice from just PG, VG and nicotine. Which are completely harmless to eat (except nicotine) and used in food products. A more rational discussion would be about if inhaling PG and VG is harmful to the lungs, or the additional unregulated stuff you find in flavoring of vape juice.
"One man's trash is another man's treasure."
Basically the weapons from "High on Life" or the butter robot from Rick and Morty, but as a vape.
When herbal vapes for cannabis came in around 5-10 years ago, it was the catalyst that started all this. Pax are the main manufacturer of these disposable vapes and one of the first on the scene to push THC following with nicotine. These were originally expensive, bulky and seen as an luxury item. I bought one, an DeVinci Ascent, I loved it.
I used it to hide that I was smoking cannabis from my parents and all the opportunities to walk the families dog and get high were wasted by playing CS:S and getting high. Teenage-hood for you.
Coil driven vapes are a different ball-game. Require actual human intervention and know-how. They are refillable in a sensible way, coils need replacing and I've seen some very cool rigs.
A USB port is pointless if you know that the user isn't going to refill the cart. If you can produce the device cheaply and not get taxed for the environmental waste. Add the R&D costs, additional safety, additional materials for the tank. What do you do with the now empty toxic tank? There are additional costs for stocking vape shops to refill the liquid. The latter is a more sustainable business option than the former.
They know the playbook. They would much prefer for you to be out with mates, stop off at a newsagents, pick up some chemical brain-rotting Dragon Soup and grab an elf-bar. Act like a twat outside of the venue and then throw it on the ground. Anything to do with vaping is foul-play. The Alcohol biz is tightly knitted with the vape/smoking biz.
Disposable also gives you plausible deniability. They get in trouble, close up shop. Relabel their brand and start again.
https://hackaday.com/2025/09/15/hosting-a-website-on-a-dispo...
I also found it interesting that the mouthpiece position would be detected with microphones rather than any other electronic sensors.
At one point in history aluminum and other alloys were considered pretty cutting edge. As was in-house electricity and plumbing. Now, those things are just everyday stuff that gets no special regard.
When you can build disposable computers at scale for pennies, it might not be "tech" anymore in the sense of cutting edge things, and instead it's just "an average Tuesday".
ESP32 has a compute power of a PC from the early '90s (it can run Quake!), in addition to having wireless connectivity you couldn't even buy back then.
Also, it's fun to imagine someone building whole racks of these (e.g. recycled ones) for a computation farm. Or a cheap home server, whatever.
Yes, there are even videos showing it on youtube.
> Nicotine in tobacco can form carcinogenic tobacco-specific nitrosamines through a nitrosation reaction. This occurs mostly in the curing and processing of tobacco. However, nicotine in the mouth and stomach can react to form N-nitrosonornicotine, a known type 1 carcinogen, suggesting that consumption of non-tobacco forms of nicotine may still play a role in carcinogenesis
Cancer risk is more complex than just carcinogens. Nicotine is known to promote the growth of existing cancer cells, and in multiple ways. A big thing with cancer that not many people are aware of is that we all have cancer cells, and get new cancer cells all the time — but that the human immune system is normally effective at detecting and killing them before they have multiplied too much. Old cancer mutations can lay dormant or kept in check for many years, but if promoted and/or the immune system gets stressed or suppressed, they'd grow and you'd "get cancer".
Different types of E-juice also contain additives for flavour, and we still don't yet know the long-term effects of some of those — when ingested as vape — which is a different to being swallowed. And by long-term, I mean 20 years or more, which in some cases is the time a cancer cell can take from formation to detectable tumour.
Presence of the Carcinogen N′-Nitrosonornicotine in Saliva of E-cigarette Users: <https://pubs.acs.org/doi/10.1021/acs.chemrestox.8b00089>
https://www.unodc.org/LSS/Announcement/Details/8afbc6e8-9439...
Which 10 Cent Microcontroller is Right for You? Comparing the CH32V003 to the PY32F002A.
Use regular vapes with e-juice
It's truly a marvel of anti-scientific thinking.
It's so curious why these things are addictive. Before I tried a vape (it was called an e-cigarette back then) I thought the addictive thing about cigarettes is the nicotine. That's part of it, but a huge part (possibly even bigger) is just the sensation of sucking in smoke/vapour from a little stick and exhaling it. Is it similar to sucking on a mother's teat or something? It really seems to satisfy in a way nothing else does.
In the UK truly disposable vapes are banned, thankfully, but I do wonder if it's now just "technically refillable" ones that people use one time. They should be taxed to the eyeballs to encourage reuse if so.
Hosting a WebSite on a Disposable Vape https://news.ycombinator.com/item?id=45252817
Please have a read:
https://pirg.org/resources/vape-waste-the-environmental-harm...
Edit: You were complaining about 'environmental' HN users, but now you've edited your comment. I guess you read the article and were convinced, that's great :)