The other one noted if you don't specify the density of plastic for bags, or paper for bags and packing, you get clingfilm thinner than you thought existed, and paper which is almost tissue in its weakness. You don't even get boxes to put the boxes in, if you don't specify boxes to be delivered in boxes. So now wrapping a pallet becomes a nightmare if they don't stack. And if you don't specify how many to stack, and how to pad the stack, they won't do unit height stacking if it costs labour time. Your risk.
I have an appreciation for very bright lamps, and the project is neat, but that stuck out to me.
I'm always fascinated by people who both feel comfortable ignoring maybe the single most impactful society-determining apparatus but will also say "no one could have seen that coming", where that is whatever they were unaware of because they chose to check out. I find the stance so fascinating because for myself, it would be impossible to not try and understand why the world is the way it is.
Everything is downstream of politics whether people want to recognize that or not, and choosing to ignore it is, in fact, a political choice.
This term evolved into the modern "idiot" which we are familiar with.
After the extermination of Melos they could credibly say they were less responsible for the actions of the polis.
And had a higher chance of deflecting the inevitable revenge on to the non idiotes Athenians.
For one thing, wouldn’t everyone claim they were against their old polis? How would the invaders have any idea who was an idiote?
I just don’t believe it’s at all easy to avoid the fate of your nation , and I especially doubt that the politically ignorant have a better chance of avoiding that fate than the well informed.
The counter extermination was only 5% of Athens total population, or so historians say, so it seems like a lot of nuance was shown.
It's genuinely baffling to me why business owners pay so little attention to the politics that will directly impact their business.
The entire tariffs thing was incredible obvious to me (I am Australian) and I only check in on US politics for 10 min a couple of times a month, any less and it would be zero.
I'd argue it's the other way around. Politics is downstream of everything else. In other words, it's easier to predict the politics of tomorrow based on the culture today than it is to predict the culture of tomorrow based on the politics of today. I'd go as far as to argue that political details are almost irrelevant except in the most extreme cases where political figures change culture (Constantine or Hitler for example). The current political climate is the result of the cultural climate, and if it wasn't, the people in office would have never been elected in the first place.
National politics doesn't teach you any more about how the world works than the politics of your workplace or your school.
He’s now unimaginably successful at YouTube but at least I’m better at predicting the content of tomorrow’s newspapers.
https://polymarket.com/event/trump-imposes-40-blanket-tariff...
Whoever was holding aggressive poly market positions on “POTUS poops pants at presser” is a millionaire now. We all know he wears diapers and has massive flatulence, but who would have predicted that specific thing?
This is about taking reasonable risk calculations as a small business with extremely high tariff exposure, when a president who did a bunch of high tariffs last time wins and election and says he'll do it again.
Sure multi-trillion-dollar financial institutions didn't run for the hills because they get paid when it goes up and paid when it goes down.
The markets priced in him backing down repeatedly, which he has.
"Trump vows massive new tariffs if elected, risking global economic war"
https://www.washingtonpost.com/business/2023/08/22/trump-tra...
(https://archive.is/20231125045858/https://www.washingtonpost...)
EDIT - Found this after my post, a MUCH better "he said it":
https://www.donaldjtrump.com/agenda47/agenda47-president-tru...
“Living under a rock” is the technical term, I believe.
> Blink and you’ll get a different measurement.
This means your environment is not controlled enough. Also quality control is usually done in terms of statistics. You might want to read something called gauge R&R. That being said, you should be proud of being able to ship a physical product!
As for quality checks, software quality teams pales in comparison to hardware quality teams. Mainly as you said, there’s a lot checks you can do in software. For hardware, bigger companies have to have their vendors qualified. The vendors have to follow their customer guidelines and do outgoing inspection. Then the company has a division to do incoming inspection. There’s a traveler that follows the kit (of parts) and there’s usually subassembly quality checks. Then final full build checks before it leaves the door.
One downside is that the active fan cooling design is questionable - the air goes over the top of the LEDs, and there aren't any dedicated exit holes so the air is just squeezing through the very small gap between the glass and the heatsink.
Years ago, there was an HN article "You Need More Lumens"[1], which in turn led me down a rabbit hole.
I ended up purchasing:
4 standard table lamps from Target,
28 2000-lumen Cree LEDs bulbs[2] and,
4 7-way splitters[3].
[1] https://news.ycombinator.com/item?id=10957614
In my office I have 6 of these, for a total of around 13,000 lumens. It effectively 6x'd my light output for around $150. Worked wonders, especially in the PNW winter.
I never got around to putting them on a dusk-to-dawn timer, so they've been burning 24/7 since I purchased them at the end of 2020 (except for the occasional power outage, of course). I paid $20/each for them.
Sample size of 1 (technically 2), but there are definitely products on the market that meet your criteria.
Interestingly, 4 of the 6 that I had running all died in the same ~3mo period, but still I was pretty happy for 4 years of use for $25/ea.
I would get/build such a thing for my mental health, but I worry the LED illumination will be counter-productive.
The only thing to watch out for is that the lamp base you're using can support the high wattage.
Hats off to the author for making it through! What a start to the journey!
What happened after this? the factory have to replace the casting mold at their own expense or you have to pay for it?
This is also why so many crowdfunded projects fail, people go into it with no idea of how hard it is to get something to market and waaaay underestimate the time and cost. Years ago for the first project we did we took an absolute worst-case estimate, then doubled the time and cost on that. We came in on time and under budget, but only just.
Tooling up a production line for even a toothbrush is well over $1.5m to get the first unit off the line. Building these factories is a different skill set, and everybody is bad at it at first.
Note hardware has a 1:6 success rate compared with service companies.
Best of luck, =3
Congrats on shipping. I'm living in the EU working California hours (4pm-1am) and will definitely be buying one.
We had another 6'5" customer who was worried about the height but they said it was totally fine even with shoes on.
[1] https://www.pcgamer.com/introducing-gameref-the-anti-cheat-h...
After 20 years of system engineering, I just expected this to always be the case. Until my most recent job with a bunch of startups, where people fly by the seat of their pants, there's no communication, documentation, protection or testing, for anything. I am pissed off daily that things don't go wrong, because people now think this is normal, and it goes against everything I've learned from experience. It seems I stumbled onto the corollary of Murphy's Law: when you expect everything to go wrong, nothing does.
The store is still online so I assume it must be. Let me run this by my wife haha.
I recently changed my car's headlamps to Chinese LED which claims to be about 37kLm and I don't know how much it is probably less than that.
Two of those lamps costee me around $24 on Amazon US (pretty sure under $10 in China).
What makes this $800+ ?
It's possible, they exist, many such LEDs are probably manufactured in China ... but the legit ones are probably more expensive, and you may need a more recognizable brand to do some QA, and keep pressure on the factory to not slip quality or inputs.
Consider the cheap screwdriver included with the lamp in this story: unexpectedly, many were more faulty than the cheapest $4 screwdriver you'd find in any hardware store. The more stories you read about manufacturing stuff in China, the more you'll see very strange things. It's not about nationality or anything, it's an extreme kind of optimization. If you didn't catch it already, maybe you didn't really need what you thought you asked for ... they're just checking/optimizing
That's all there is to it. Take a look at https://www.youtube.com/watch?v=5CJqAJ2LXw8&t=852.
Is it the ability to change Hue that makes this expensive?
I don't know much about car headlights, but chatgpt says high beams are typically 25-45 watts, and assuming a generous 200lm/w that gives you 5000-9000 lm.
Roughly speaking, it's expensive because it's 50 lbs & tons of electrical components (that are much higher quality than $24 headlights).
> That was the worst period of my life; I would go to bed literally shaking with stress. In my opinion, Not Cool!
How/where did you find your suppliers/factories?
Impressive if so - every time I've designed something approaching that power level I've ended up needing forced air cooling.
> A: It's cooled through our large heatsink and ultra quiet Noctua fan. The fan only turns on above 75% brightness. At max power, the heatsink is cool enough to put your hands on it for a couple of seconds.
What stood out to me: the factory miscommunications and quality issues compound because you can't iterate as fast as software. Each mistake costs weeks and thousands of dollars.
For anyone considering hardware: if you're not getting deposits or strong signals of purchase intent before tooling up, you're basically gambling. The author's approach of getting commitments first is the right playbook.